The RTQ2536-QA is a sink/source tracking termination regulator. It is ,specifically designed for low-cost and low-external component count systems. ,The RTQ2536-QA possesses a high speed operating amplifier that provides fast ,load transient response and only requires a minimum 10μF (effective value) ,ceramic output capacitor. T...
产品 ▶ 存储器电源解决方案 ▶ RTQ2536-QA
|
The RTQ5132 is an integrated solution for DDR5 SODIMM and UDIMM power ,management IC. This device provides 1 dual-phase converter, 1 single phase ,converter and 2 LDOs. The RTQ5132 is available in a WQFN-28L 3x4 (FC) package.,,
产品 ▶ 整合型电源管理 IC ▶ RTQ5132
|
The RTQ6749 is an I2C interface programmable power management IC. The IC ,includes two synchronous boost converters for PAVDD and VGH, one synchronous ,NAVDD buck-boost, one VGL charge pump, one high performance VCOM with 8-bit ,Calibrator and one RESET voltage detector. With available in a WQFN-32L 5x5 ,package, this device is ...
产品 ▶ 整合型电源管理 IC ▶ RTQ6749-QT-A2
|
2.5V to 5.5V Input Supply Voltage, I2C Interface, Power-on and Power-off Sequence Free, PAVDD Programmable Output Voltage 5V to 7.3V, PAVDD Output Current Capability up to 200mA, NAVDD Programmable Outpu...
产品 ▶ 整合型电源管理 IC ▶ RTQ6752-QT
|
The RT9752 is a USB Type-C Downstream Facing Port (DFP) controller with back to ,back power switch which offers 28V tolerance on VOUT pin at off state and 3A ,rated supply current for VBUS for USB Type-C applications. The RT9752 have ,Configuration Channel (CC) function to determine when USB device is attached. ,If the Upstream ...
产品 ▶ 电子开关 ▶ RT9752
|
The RT1710S is a Type-C cable ID for active and passive cables.All USB Full-Featured Type-C cables shall be electronically marked. Electronically marked cables shall support USB Power Delivery Structured VDM Discover Identity command directed to SOP'. This provides a method to determine the characteristics of the cable, e.g....
设计支持 ▶ 设计参考 ▶ EVB_RT1710SGQW
|
The RT2568 is a sink/source tracking termination regulator. It is specifically designed for low-cost and low-external component count systems. The RT2568 possesses a high speed operating amplifier that provides fast load transient response and only requires a minimum 10μF x 3 ceramic output capacitor. The RT2568 supports remote ...
设计支持 ▶ 设计参考 ▶ EVB_RT2568GQW
|
The RT5795A is a full featured 5.5V, 2A, Advanced Constant-On-Time (ACOT) synchronous step-down converter with two integrated MOSFETs. The advanced COT operation allows transient responses to be optimized over a wide range of loads, and output capacitors to efficiently reduce external component count. The RT5795A provides up to ...
设计支持 ▶ 设计参考 ▶ EVB_RT5795AGQW
|
The RT8498 is a current-mode LED driver supporting wide input voltage range from 3V to 18V and output voltage up to 18V. With internal 350kHz operating frequency, the size of the external PWM inductor and input/output capacitors can be minimized. High efficiency is achieved by a 100mV current sensing control. LED dimming control...
设计支持 ▶ 设计参考 ▶ EVB_RT8498GE
|
Richtek VoltaicGauge™ technology provides accurate state of charge (SoC) sensing and avoid accumulation error on capacity calculation
https://www.richtek.com/battery-management/en/gauge.html
|